Product Platform
CAMLX2 Radio Modem Series
A combined radio and cellular modem in a single platform — delivering significant advances in data speed, security, and interface density for the most demanding SCADA and industrial IoT deployments.
⚙️ Industrial SCADA & IoT Radio Modem
CAMLX2 Platform
The next-generation industrial radio modem platform combining radio and cellular connectivity in one unit. Engineered for 24/7 reliable wireless data transport in mission-critical SCADA, Telemetry, and IoT applications at critical infrastructure — where downtime is simply not an option.
At a Glance
📡 160 / 300 / 400 / 800 / 900 MHz
⚡ 10 W Transmit Power
🔁 Half or Full Duplex
📶 CPFSK – 256 QAM Modulation
🚀 1.7 Mb/s @ 256-QAM
📏 6.25 – 300 kHz Channel Spacing
🔌 4× ETH · 1× SFP · 1× COM · 1× USB
Highlights & Benefits
Mission-Critical Reliability
Engineered for 24/7 uninterrupted operation in the most demanding industrial environments — from unmanned substations to remote pipeline monitoring stations.
Radio + Cellular in One
Combines a high-performance radio modem with cellular connectivity in a single unit, simplifying installation and reducing the hardware footprint at remote sites.
High-Speed Data Transport
Up to 1.7 Mb/s at 256-QAM — a significant step-up from legacy SCADA radio systems, enabling faster polling cycles, richer data payloads, and real-time telemetry.
Enhanced Security
Built with state-of-the-art security concepts carefully implemented throughout — protecting sensitive control data across power, water, and pipeline infrastructure.
Rich Interface Suite
4× Ethernet, 1× SFP fibre port, 1× COM serial, and 1× USB — plus mPCIe expansion on the flagship CAMLX2 — enabling integration with virtually any SCADA RTU or PLC.
Flexible Channel Spacing
Configurable channel spacing from 6.25 kHz to 300 kHz (CAMLX2) adapts to local spectrum allocations and legacy narrow-band SCADA licences without re-engineering.
Model Comparison — CAMLX2 · CAMLX2E · CAMLX
All three variants share the same core platform and frequency options (160 / 300 / 400 / 800 / 900 MHz). Choose the model that matches your required data throughput, interface density, and duplex mode.
| Specification | CAMLX2 Flagship ★ Top | CAMLX2E Enhanced | CAMLX Standard |
|---|---|---|---|
| Maximum Data Speed | 1.7 Mb/s @ 256-QAM | 250 Kb/s @ 64-QAM | 66 Kb/s @ 16-QAM |
| Speed @ 25 kHz Channel | 167 Kb/s | 125 Kb/s | 83 Kb/s |
| Channel Spacing | 6.25 – 300 kHz | 6.25 – 50 kHz | 6.25 – 50 kHz |
| Ethernet Interfaces | 4× ETH | 2× ETH | 1× ETH |
| SFP Fibre Port | 1× SFP ✓ | — | — |
| Serial COM Port | 1× COM | 1× COM | 2× COM |
| USB Port | 1× USB ✓ | 1× USB ✓ | — |
| mPCIe Expansion Slot | ✓ Yes | ✕ No | ✕ No |
| Full Duplex Operation | ✓ Yes | ✕ Half only | ✕ Half only |
| Transmit Power | 10 W | 10 W | 10 W |
| Frequency Bands | 160 · 300 · 400 · 800 · 900 MHz (all variants) | ||
Hot-Standby Master Station
🔴 Live Redundancy
SCADA IoT-HS — 19" Hot-Standby
A fully redundant 19-inch rack-mount master station designed for the most demanding SCADA headend applications. Two independent radios and two power supplies operate in hot-standby configuration — one fails, the other instantly takes over with zero interruption to the SCADA network.
Industry Applications
Power Utilities
Substation automation, distribution management, fault detection, and remote control of grid assets — including AMI meter reading over licensed radio bands.
Water & Wastewater
Pump station monitoring, reservoir level telemetry, pipe pressure alarms, and distribution network control for municipal and industrial water utilities.
Oil & Gas
Pipeline SCADA, compressor station monitoring, tank level telemetry, and safety shutoff systems across remote and hazardous-area deployments.
Industrial Automation
Plant-wide wireless connectivity between PLCs, RTUs, DCS systems, and HMI/SCADA servers — replacing unreliable leased lines or cable infrastructure.
Environmental Monitoring
Weather stations, flood gauges, air quality sensors, and soil monitoring networks transmitting to central servers over licensed sub-GHz radio.
Mining & Infrastructure
Conveyor belt telemetry, ventilation monitoring, site security, and asset tracking across large-area mining and heavy-civil infrastructure sites.
System Network Diagram
Typical SCADA / IoT Radio Network Architecture
CAMLX2 Radio Unit — Front View
Key Technical Specifications
| Parameter | CAMLX2 (Flagship) |
|---|---|
| Product Type | Industrial Radio & Cellular Modem |
| Frequency Bands | 160 MHz · 300 MHz · 400 MHz · 800 MHz · 900 MHz |
| Transmit Power | 10 W |
| Duplex Mode | Full Duplex / Half Duplex (configurable) |
| Modulation | CPFSK through 256-QAM |
| Maximum Data Rate | 1.7 Mb/s @ 256-QAM |
| Data Rate @ 25 kHz | 167 Kb/s |
| Channel Spacing | 6.25 kHz – 300 kHz (selectable) |
| Ethernet Interfaces | 4× 10/100/1000 Mbps ETH |
| Fibre Interface | 1× SFP |
| Serial Interface | 1× COM (RS-232/RS-485) |
| USB | 1× USB |
| Expansion | 1× mPCIe slot |
| Hot-Standby Version | SCADA IoT-HS — dual radio, dual PSU, 19" rack |
| Applications | SCADA · Telemetry · IoT · Utilities · Oil & Gas |