Product Family
Two Wireless Internet Platforms
Whether you need a quick license-free deployment for a community or a large-scale licensed network serving thousands — our BWA portfolio gives you the right tool for every scenario.
📡 License-Free · Point-to-Multipoint
BWA5.8 — 5.8 GHz Wireless Internet
A two-way, high-capacity broadband wireless access system providing last-mile internet to over 100 subscribers per base station — operating in the license-free 4.9 to 5.9 GHz band with no spectrum costs.
At a Glance
100+
Subscribers per base station
240Mbps
Max throughput (BWA5.8-240)
30km
Max coverage distance
120°
Sector coverage angle
Highlights & Benefits
100+ Simultaneous Subscribers
Provides simultaneous wireless internet access to over 100 commercial and residential subscribers from a single base station — ideal for ISPs, housing complexes and campuses.
No Spectrum Licence Required
Operates in the globally recognised license-free 4.900–5.925 GHz band — eliminating spectrum licence fees and enabling rapid, low-cost deployments without regulatory delays.
Up to 240 Mbps Throughput
The BWA5.8-240 delivers up to 240 Mbps aggregate throughput using 3×3 MIMO — enough to support high-definition video streaming and demanding business applications for all subscribers.
90° and 120° Sector Coverage
Flexible base station sector antennas in 90° and 120° coverage configurations allow operators to design cell layouts that maximise subscriber density and coverage area.
Up to 30 km Range
Extends broadband connectivity up to 30 kilometres from the base station — bridging the last mile in rural areas, industrial parks and remote communities where fibre is not viable.
Dynamic Channel Selection
Automatic Dynamic Channel Selection (DCS) monitors interference and switches to the clearest channel — maintaining link quality even in congested unlicensed band environments.
OFDM with Dynamic Data Rate
OFDM modulation with BPSK through QAM64 and MCS 0–15 dynamic data rate selection automatically adapts to each subscriber's signal conditions for maximum efficiency.
AES-128 Encryption
Built-in AES-128 encryption secures all over-the-air traffic — protecting subscriber data and ensuring the network meets enterprise and regulatory security standards.
RADIUS Authentication
Supports both Internal MAC Address Control Lists and RADIUS-based authentication — enabling centralised subscriber management and seamless integration with existing OSS/BSS systems.
Available Models
BWA5.8-240
3×3 MIMO · 240 Mbps Max
Triple Chain · 26 dBm
Triple Chain · 26 dBm
BWA5.8-100B
2×2 MIMO · 100 Mbps Max
Dual Chain · 26 dBm
Dual Chain · 26 dBm
Full Technical Specifications
| Parameter | BWA5.8-240 Base Station | BWA5.8-100B Base Station |
|---|---|---|
| Frequency Band | 4.900 – 5.925 GHz | 4.900 – 5.925 GHz |
| Channel Selection | Dynamic Channel Selection (DCS) based on interference detection | Dynamic Channel Selection (DCS) based on interference detection |
| MIMO | 3×3 | 2×2 |
| Channel Bandwidth | 40 MHz · 20 MHz · 10 MHz | 40 MHz · 20 MHz · 10 MHz |
| Modulation | OFDM: BPSK, QPSK, QAM16, QAM64 | OFDM: BPSK, QPSK, QAM16, QAM64 |
| Data Rate | MCS 0–15, 6.5 to 300 Mbps (Dynamic) | MCS 0–15, 6.5 to 300 Mbps (Dynamic) |
| Max Throughput | 240 Mbps | 100 Mbps |
| Transmit Power | 26 dBm max (Triple chain) | 26 dBm max (Dual chain) |
| Sensitivity (40 MHz) | −87 dBm to −68 dBm (MCS 0–15) | −88 dBm to −69 dBm (MCS 0–15) |
| Antenna | Dual Polarised | Dual Polarised |
| Encryption | AES-128 | AES-128 |
| Authentication | Internal MAC ACL & RADIUS | Internal MAC ACL & RADIUS |
| Max Subscribers | 100+ per base station | 100+ per base station |
| Max Range | Up to 30 km | Up to 30 km |
| Sector Coverage | 90° and 120° | 90° and 120° |
Network Diagram
Upstream Repeater & TX Antenna
BWA 5.8 GHz — Network Deployment Diagram
The available frequency range (4.900–5.925 GHz) may vary based on local country regulations and applicable license-free band allocations. Our team can advise on permitted operating frequencies for your region. Contact us for a pre-deployment regulatory check.
🏙️ Licensed Bands · High Capacity PtMP
BWA-2000 System
A high-capacity licensed-band point-to-multipoint wireless internet system providing last-mile broadband to over 2,000 subscribers within a 40 km radius — a competitive alternative to fibre, cable and DSL for large-scale deployments.
At a Glance
2000+
Subscribers per base station
580Mbps
Downstream / sector (64 QAM)
40km
Max coverage radius
3
Available licensed bands
Highlights & Benefits
2,000+ Subscribers per Cell
Provides reliable broadband internet to over 2,000 commercial and residential subscribers within a single cell — making it ideal for ISPs, city-wide networks and rural broadband schemes.
40 km Coverage Radius
Extends licensed-band broadband connectivity up to 40 kilometres from the base station — far exceeding the range of license-free systems and enabling large-area single-cell deployments.
Licensed Spectrum — Interference-Free
Operating in the licensed 2.5 GHz, 10.5 GHz and 28 GHz bands provides interference protection and guaranteed spectrum access — essential for carrier-grade service level agreements.
580 Mbps Downstream per Sector
Delivers 580 Mbps downstream throughput per sector at 64 QAM — sufficient to support high-speed broadband services to hundreds of active users simultaneously.
DOCSIS Platform
Built on the proven DOCSIS (Data over Cable Systems Interface Specification) platform — the same technology used by major cable operators — ensuring industry-standard compatibility and scalability.
Fibre-Alternative for Last Mile
Provides a competitive wireless alternative to fibre, cable and DSL — dramatically reducing infrastructure costs and deployment time in areas where ground works are impractical or uneconomic.
Three Licensed Band Options
Available in 2.5 GHz, 10.5 GHz and 28 GHz licensed bands — offering flexibility to match your existing spectrum holdings or frequency allocation plan.
Scalable to Thousands of Subscribers
The point-to-multipoint architecture scales seamlessly by adding sectors or cells — enabling operators to grow their network incrementally as subscriber demand increases.
Carrier-Grade Reliability
Designed for operators and carriers requiring high availability, low latency and the performance guarantees that support commercial SLAs for residential and business customers.
Available Frequency Bands
2.5 GHz
Licensed Band
Wide area coverage
Wide area coverage
10.5 GHz
Licensed Band
High capacity
High capacity
28 GHz
Licensed Band
Ultra-high capacity
Ultra-high capacity
Key Technical Specifications
| Parameter | Specification |
|---|---|
| System Name | BWA-2002 |
| Frequency Bands | 2.5 GHz, 10.5 GHz and 28 GHz (licensed) |
| Downstream Frequency (2.5 GHz) | 2,574 – 2,690 MHz |
| Upstream Frequency (2.5 GHz) | 2,500 – 2,530 MHz |
| Downstream Data Throughput | 580 Mbps per sector (64 QAM) |
| Upstream Data Throughput | 100 Mbps per sector (16 QAM) |
| Platform Standard | DOCSIS (Data over Cable Systems Interface Specification) |
| Maximum Coverage Radius | 40 km |
| Max Subscribers per Base Station | 2,000+ |
| Per-Sector Throughput | 300 Mbps |
| Architecture | Point-to-Multipoint |
Base Station Deployment Diagram
BWA-2000 — Point-to-Multipoint Base Station Layout
Which System is Right for You?
Not sure which platform suits your project? Our RF planning team can run a feasibility study based on your subscriber density, geography and spectrum availability. Get in touch for a free consultation.